Download Inhoudsopgave Inhoud Print deze pagina

Cleaning And Maintenance - EUROM CoolStar 65 Gebruiksaanwijzing

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

• Turn the lock button (9) open and pull the water reservoir roughly 7 cm
backwards and fill with clean cold water; Fill the reservoir above the "MIN"- but
below the "MAX" level. Ensure that the plug does not get wet or fall into the
water tank. Never use the cooling function without sufficient water in the water
tank.
• If you require extra cooling, you could add frozen ice packs or ice cubes in the
water reservoir (not included).
• If you wish to use the cool function, ensure there is sufficient water in the
reservoir.
• If you have not used the unit for some time, refresh any remaining water.
• Put the air cooler in the correct position.
Always unplug the power cord when you pour water in or out of the tank!
Operation
Insert the plug into the socket. The unit is now ready for use.
- By pushing on the 1, 2 or 3, you start
ventilation on low, medium or high power.
- By pushing the COOLING button next, you
start the cooling function. The pump
circulates water from the reservoir via the
water curtain, where it partially evaporates,
thus ensuring cooling. By pushing this
button again, the function is disabled again.
- The SWING button makes the breeze
swivel from left to right horizontally.
Pressing it again switches this function off.
By adjusting the horizontal panels
manually, you can adjust the vertical outlet
direction.
- By pushing the 0-button, you switch off the
ventilation function. To switch off the device, all 3 functions must be switched off
separately! Then always remove the plug from the socket.

Cleaning and maintenance

Switch off the equipment and remove the plug from the socket before cleaning or
carrying out maintenance work.
• Wipe the outside of the equipment regularly with a dry or slightly damp cloth. Do
not use aggressive soaps, sprays, cleaners or abrasives, waxes, polishes or
chemical solutions! Ensure that the operating panel does not get wet.
• Use a vacuum cleaner to carefully remove any dust and dirt from the grills and
ensure that the air intake and outlet openings are clean. Be careful not to touch
or damage any internal parts during cleaning!
Take note of the water level during operation!
27

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

385830

Inhoudsopgave