Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Installation
EN
14
GREENWORKSTOOLS.EU
Version 1 - 2020.12.31
Connect the boundary wire to the charging station as follows:
Remove the protective cover on the charging station and thread
1
the wire behind the tabs into the channel at the rear of the
charging station.
2
Press the connector onto the metal pins on the charging station
(marked with left and right arrows).
NOTE: Make sure the boundary wire to the right of the charging station
is connected to the arrow pointing right and the same for the left side.
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
