Becker Centronic TimeControl TC445-II Gebruikers- En Montagehandleiding pagina 36

Verberg thumbnails Zie ook voor Centronic TimeControl TC445-II:

Advertenties

Beschikbare talen

Roller shutter selection

With the roller shutter function, the roller shutter runs in maintained operation

mode after a travel button is pressed.

Venetian blind selection

With the venetian blind function, the venetian blind runs in touch mode to facil-

itate precise positioning of the laths. If you press a travel button for longer than

1 second, the venetian blind runs in maintained operation mode.

After moving to the programmed intermediate and end positions, the laths

automatically tilt (if the tilt position was programmed).

Manual/Automatic slide switch

In slide switch position , only manual drive commands can be performed

(e.g. UP, STOP, DOWN via button actuation).

In slide switch position

time, Astro function, etc.).

The current setting is shown on the display.

Channel

The channel of a transmitter can be programmed into one or more receivers.

One receiver is operated through an individual command, several receivers

through a group command.

Central command

If all the channels of the transmitter are selected, it is possible to operate all of

the assigned receivers/groups simultaneously.

Channel selection button

Up to 5 channels can be selected using the channel selection button. The indi-

vidual channels are indicated by the corresponding channel indicator lamp

lighting up. If all of the channel indicator lamps light up simultaneously, the

central command can be programmed or transmitted.

You can make a note of the programmed channel in the la-

belling field underneath the transparent film.

36 - en

Explanation of functions

, automatic drive commands can be performed (e.g.

Advertenties