when you insert the door. Use force if
necessary.
12.5 Removing and cleaning the
door glasses
The door glass in your product can be
different in type and shape from the
examples you see in the images. The
number of glasses can also be different.
1. Hold the door trim B on the top edge of
the door at the two sides and push
inwards to release the clip seal.
2
B
2. Pull the door trim to the front to remove it.
3. Hold the door glass panels on their top
edge one by one and pull them upwards
from the guide.
4. Clean the door glass panels.
To install panels, do the same steps in
reverse.
12.6 Replacing the lamp
WARNING!
Risk of electric shock.
The lamp can be hot.
1. Turn off the oven. Wait until the oven is
cold.
2. Disconnect the oven from the mains.
3. Put a cloth on the bottom of the cavity.
20
ENGLISH
1
The back lamp
The lamp glass cover is at the back of
the cavity.
1. Turn the lamp glass cover
counterclockwise to remove it.
2. Clean the glass cover.
3. Replace the oven lamp with a suitable
300 °C heat-resistant oven lamp.
Use the same oven lamp type.
4. Install the glass cover.
12.7 The drawer
WARNING!
Do not put food inside the drawer.
WARNING!
Do not keep flammable items such as
cleaning materials, plastic bags, oven
gloves, paper, cleaning products,
aerosols, plastic items) in the drawer.
When you use the oven, the drawer can
become hot. There is a risk of fire.
The drawer below the oven can be removed
for cleaning.
Removing the drawer:
1. Pull the drawer out until it stops.
1
2. Lift the drawer at a small angle and
remove it from the drawer support rails.
Inserting the drawer:
1. To insert the drawer set the drawer on the
support rails. Make sure that the catches
engage correctly into the rails
2