6. HOB - DAILY USE
WARNING!
Refer to Safety chapters.
6.1 Heat setting
Symbols
Function
Off position
Double zone
Keep warm
1 - 9
Heat settings
Use the residual heat to decrease energy
consumption. Deactivate the cooking
zone approximately 5 - 10 minutes before
the cooking process is completed.
Turn the knob for the selected cooking zone
to a necessary heat setting.
To complete the cooking process, turn the
knob to the off position.
6.2 Activating and deactivating the
outer rings
You can adjust the surface you cook to the
dimension of the cookware.
7. HOB - HINTS AND TIPS
WARNING!
Refer to Safety chapters.
7.1 Cookware
The cooking results depend on the cookware
material
To activate the outer ring: turn the knob
clockwise through a light resistance to
Then turn the knob counterclockwise to the
correct heat setting.
To deactivate the outer ring: turn the knob
to the off position. The indicator goes out.
6.3 Residual heat indicator
WARNING!
As long as the indicator is visible, there is
a risk of burns from residual heat.
The indicator appears when a cooking zone
is hot, but it does not function if mains power
is disconnected.
The indicator may also appear:
• for the neighbouring cooking zones even if
you are not using them,
• when hot cookware is placed on cold
cooking zone,
• when the hob is deactivated but the
cooking zone is still hot.
The indicator disappears when the cooking
zone has cooled down.
The bottom of the cookware must be as
thick and flat as possible.
Ensure pan bases are clean and dry
before placing on the hob surface.
.
ENGLISH
11