Becker Centronic SunWindControl SWC510 Gebruikers- En Montagehandleiding pagina 21

Inhoudsopgave

Advertenties

Beschikbare talen

Adjusting the awning into the intermediate position

1. Press the EXTEND button twice within one second.

The awning will move into the intermediate position.

Deleting the intermediate position

1. Adjust the awning into the intermediate position.

2. Now press and hold the STOP button. Within 3 seconds also press the EX-

TEND button and keep both buttons pressed.

The awning will "nod" to confirm.

The intermediate position has been deleted.

Fabric Tension Position / Tilt Position

Note

Use this function to travel the awning from the extended end position to

the fabric tension position / tilt position. Both end positions have to be

set prior to setting the fabric tension position / tilt position.

The fabric tension position / tilt position is travelled to from the extend-

ed end position.

Setting the fabric tension position / tilt position

1. Travel the awning to the fabric tension position / tilt position.

2. Now press the STOP button and within 3 seconds the retract button, keep

both buttons pressed.

The awning will "nod" to confirm.

The fabric tension position / tilt position has been saved.

Travelling to the fabric tension position / tilt position

Press the retract button twice within one second.

The awning travels to the fabric tension position / tilt position

Deleting the fabric tension position / tilt position

1. Travel the awning to the fabric tension position / tilt position.

2. Now press the STOP button and within 3 seconds the retract button, keep

both buttons pressed.

The awning will "nod" to confirm.

The fabric tension position / tilt position has been deleted.

Inhoudsopgave

Advertenties

Inhoudsopgave