Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
9.4 Door adjustment
Check the closing of the door during installation or maintenance. The door can be adjusted if desired. This will be
the case if sealing is insufficient (gaps).
Ø
Check the sealing of the door by placing a sheet of paper between the door and the fire. After closing the door, it
should not be possible to pull out the sheet of paper easily. Check the outside of the fire.
Proceed as follows when adjusting the door:
Ø
Loosen the 2 hexagonal bolts on the top and bottom side of the non-hinging part of the door with an open-end
spanner by one turn (see Annex 2, fig. 10).
Do not fully remove these bolts!
!Caution
Ø
The door can now be adjusted.
Ø
Check whether the door still seals well, using the test with a sheet of paper described above.
Ø
Tighten the bolts again.
40
I N S T A L LA T I ON M A N U A L
Advertenties
Hoofdstukken
Inhoudsopgave
