Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
IN S TA LLA TION M A N U A L
9.3 Interior lining
9.3.1 Vermiculite
The fire's vermiculite plates are located on the bottom and against the side and rear wall of the appliance. In the
following situations the vermiculite plates must be taken out:
•
When disassembling the air slide valve (see section 9.2.2).
•
To be able to reach the adjustable legs (see section 9.1).
•
When replacing the vermiculite plates.
The bottom plates and the underlying felt are first removed, then the side plate and the rear plates last.
The insertion of the vermiculite plates takes place in reverse order.
Make sure that the vermiculite plates are placed back in the original position! The back plate, for instance, must be
!Caution
placed with the small, not countersunk, holes towards the front.
9.3.2 Flame baffle plate
On delivery the flame baffle plate (see Annex 2, fig. 8) will be lying on the bottom of the appliance.
It must be placed on the accompanying profiles in the top of the appliance.
To do this proceed as follows:
Ø
Take the flame baffle plate and tilt it backwards.
The stainless steel profile must be placed at the front with the screw heads on top (see Annex 2, fig. 8).
!Caution
Ø
Lift the flame baffle plate into the top of the appliance.
Ø
Slide the front of the flame baffle plate over the iron support located at side pane side of the appliance
(see Annex 2, fig. 9).
Ø
Then slide the flame baffle plate towards the vermiculite plate which is located against the side wall.
Ø
The flame baffle plate is now in the correct place.
The removal of the flame baffle plate takes place in reverse order.
39
Advertenties
Hoofdstukken
Inhoudsopgave
