Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
SAFETY RULES
General
Please familiarise yourself with the safety features and instructions by first reading the documentation
supplied with this product before using the equipment. This product has been designed and tested in
accordance with international standards. The equipment must be used exclusively for the purpose for
which it was designed.
WARNING: ELECTRIC SHOCK HAZARD.
The product is used in conjunction with a permanent energy source (battery). Input and/or output
terminals may still be dangerously energised, even when the equipment is switched off. Always switch
off the A/C supply and the battery before carrying out maintenance or servicing the product.
The product has no internal user-serviceable components. Do not remove the front plate or operate
the product if any panels have been removed. All servicing must be undertaken by qualified personnel.
Never use the product where there is a risk of gas or dust explosions. Consult the battery
manufacturer's information to ascertain that the product is intended for use in conjunction with the
battery. Always comply with the battery manufacturer's safety instructions.
WARNING: Do not lift heavy loads without assistance.
Installation
Read the installation instructions in the user manual before switching on the equipment.
This is a Safety Class I product (supplied with a protective earthing terminal). Uninterruptable
protective earthing must be provided at the AC input and/or output terminals. An additional earth point
is located externally on the product. Whenever it is likely that the earth protection has been damaged,
the product must be turned off and secured against unintended operation; please contact qualified
service staff.
Ensure that the in-leads are fitted with fuses and circuit breakers. Never replace a safety component
with a different type. Consult the manual to determine the correct component.
Before applying power, ensure that the available power source matches the configuration settings of
the product as described in the manual.
Ensure that the equipment is used under the correct ambient conditions. Never operate the product in
a wet or dusty environment. Ensure there is adequate free space for ventilation around the product
and check that the ventilation vents are not blocked.
Ensure that the required voltage does not exceed the product's capacity.
Transport and Storage
Ensure that the mains power and battery leads have been disconnected before storing or transporting
the product.
No liability can be accepted for any transport damage if the equipment is shipped in non-original
packaging.
Store the product in a dry environment; the storage temperature must be between -20°C en 60°C.
Consult the battery manufacturer's manual in respect of transport, storage, charging, recharging and
disposal of the battery.
4
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
Gerelateerde Handleidingen voor Victron energy Phoenix 12/850
Gerelateerde Producten voor Victron energy Phoenix 12/850
- Victron energy Phoenix Multi Compact 12/800/35
- Victron energy MultiPlus Compact 12/800/35-16
- Victron energy Phoenix VE.Direct 12/800
- Victron energy Phoenix 12/225
- Victron energy Phoenix 12/301
- Victron energy Phoenix Multi Compact 12/1600/70
- Victron energy Phoenix Inverter Compact 12/1200
- Victron energy Phoenix MultiPlus 12/2000/120