Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Maintenance
UTN...EX Top Mounted Level Indicator require no maintenance if used as intended. However, they
must be subjected to a visual inspection within the framework of regular general inspections and
must be included in container pressure tests.
Important!
The float is designed for the medium density level indicated on the type plate. Use in
fluids with a different specific gravity results in measurement deviations.
The medium to be monitored should not contain any soiling or coarse particles.
It should also not tend to crystallize out.
The magnetic roller display and attached magnetic switch must be positioned and set using the
enclosed float prior to installation.
The UTN...EX Top Mounted Level Indicator must not be installed near strong magnetic or
electromagnetic fields (at least 1 m away).
Correct functioning of the UTN...EX Top Mounted Level Indicator can only be guaranteed if original
KSR Kuebler accessories and replacement parts are used.
Error Search
The following table lists the most frequent causes of error and the necessary
countermeasures
Error
KSR Top Mounted
Level Indicator
UTN...EX cannot be
attached at the
intended position on
the container
Please give us a call in case of any difficulties. We will do everything we can to
provide you with the required advice and help.
MBUTNEX.doc
Cause
Thread or flange
dimensions of UTN...EX
do not agree
Thread of mounting plug
on container defective
Bolt threading on
UTN...EX defective
Countermeasure
Reworking of container
Send back to factory
Reworking of the thread or
replacement of the
attachment muff
Send back to factory
16 / 21
Advertenties
Inhoudsopgave
