Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
7. Cleaning and maintenance
To enjoy years of outstanding performance from your appliance, regular services of the
appliance is mandatory as followings:
• The appliance should be inspected before at least one time a year by a Qualified Service
only.
• More frequent cleaning may be required according to the use of the appliance.
• Any guard or other protective device removed for servicing the appliance must be re
placed before operating it.
• Keep exterior surfaces clean, free and clear from combustible materials.
• Use warm soapy water for cleaning. Never use flammable or corrosive cleaning agents.
• While washing your unit makes sure to keep the area around the burner assembly dry at
all times. If the gas control is exposed to water in any way, DO NOT tries to use it. It must be
replaced.
• Burner and LPG compartment circulating air passageways of the appliance must be kept
clean.
• Airflow must be unobstructed. Keep controls, burner and circulation air passageways clean.
Signs of possible blockage include:
Gas odor with extreme yellow tipping of flame / Appliance glow is excessively uneven /
Appliance makes popping noises.
• Spiders and insects can nest in burner or orifices. This dangerous condition can damage
the appliance and render it unsafe for use. Clean burner holes by using a heavy duty pipe
cleaner. Compressed air may help clear away smaller particles.
• Carbon deposits may create a fire hazard. If any carbon deposits develop, clean dome and
engine with warm soapy water.
• After the burner and lava rocks are completely cooled down, remove it from the bowl and
use a soft brush to get rid of the mild stains, loose dirt and soil. Wipe with a soft cloth.
• Clean the bowl and afterward put lava rocks again in proper position.
• For proper cleaning, a vacuum cleaner can be used.
Note: In a salt-air environment (such as near the sea), corrosion occurs more quickly than
normal. Frequently check the corroded areas and repair them promptly. Stubborn stains,
discoloration and possibly rust pitting can occur from exposure to harsh outdoor
conditions. Be careful not let any powder or solvent come in contact with painted or plastic
components as damage may occur.
After long use, some discoloration can come up and it screen is normal.
Make sure both gas supplies is in OFF position before changing battery. Please refer to the
process of assembling battery.
Please contact the Manufacturer or dealer for information regarding replacement hoses,
thermocouples, igniters, lava rocks, etc.
Attention: Never use unauthorized parts or component for this appliance.
Use only original equipment replacement spare parts and components.
Otherwise may void the warranty of this product and result in a hazardous condition.
STORAGE (after use)
• Turn control knob in "OFF" position (full disk).
• Turn LPG cylinder in "OFF" position.
• Store the appliance in a cool dry place away from direct sunlight; store it upright in an area
sheltered from direct contact with inclement weather (such as rain, sleet, hail, snow, dust
and debris).
• If desired, cover to protect exterior surfaces and to prevent build up in air passages.
Note: Wait until appliance is cool before covering.
During periods of extended inactivity or when transporting:
• Turn control knob in "OFF" position (full disk).
• Disconnect LPG cylinder and move to a secure, well ventilated location outdoors. DO NOT
store in a location that will exceed 50 °C.
• Store appliance upright in an area sheltered from direct contact with inclement weather
(such as rain, sleet, hail, snow, dust and debris).
• If desired, cover appliance to protect exterior surfaces and to prevent build up in air
passages.
Note: Wait until appliance is cool before covering.
- 23 -
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
