Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Figure 2 – Illustrates the supplied regulator being placed into the gas cylinder, please see below
Figure 2 – Illustrates the supplied regulator being placed into the gas cylinder, please see below the
the direction to close the gas tank is clockwise and to open the gas is anticlockwise.
direction to close the gas tank is clockwise and to open the gas is anticlockwise.
This appliance must be kept away from flammable materials during use.
This appliance must be kept away from flammable materials during use.
The pressure regulating valve shall comply with the standard EN16129.
The pressure regulating valve shall comply with the standard EN16129.
Disconnect LP Gas cylinder
Disconnect LP Gas cylinder.
Before disconnecting make sure the LP gas tank valve in "CLOSED"
Before disconnecting make sure the LP gas tank valve in "CLOSED".
Disconnect gas line from LP gas cylinder by turning knob counterclockwise until it is loose.
Disconnect gas line from LP gas cylinder by turning knob counterclockwise until it is loose.
After connecting to gas cylinder, a leak testing is necessary.
After connecting to gas cylinder, a leak testing is necessary.
Danger: When changing the gas container, care must be taken to keep away from any source of ignition.
Danger: When changing the gas container, care must be taken to keep away from any source
of ignition.
Leak Testing (To be performed in a well-ventilated area)
Leak Testing (To be performed in a well-ventilated area).
Confirm all barbecue control knobs are in the off position.
• Confirm all barbecue control knobs are in the off position.
• Open the gas control valve on gas cylinder.
Open the gas control valve on gas cylinder.
• Check for leaks by brushing soap solution over all gas system joints, including all valve
connections, hose connections and regulator connections.
Check for leaks by brushing soap solution over all gas system joints, including all valve connections,
hose connections and regulator connections.
NEVER USE AN OPEN FLAME to test for leaks at anytime.
NEVER USE AN OPEN FLAME to test for leaks at anytime.
If bubbles form over any of the joints, there is a leak. Turn off the gas supply and retighten
If bubbles form over any of the joints, there is a leak. Turn off the gas supply and retighten that joint.
that joint. Repeat the test. If bubbles form again, stop trying; contact your local dealer
Repeat the test. If bubbles form again, stop trying; contact your local dealer for assistance. Leak test
for assistance.
annually, and whenever the gas cylinder is removed or replaced.
Leak test annually, and whenever the gas cylinder is removed or replaced.
5. Installing with gas supply system
Important Notes:
• To operate you will need a precision-filled standard G30/G31 grill LP gas cylinder with
external valve threads.
Use standard flexible tube with length less than 0.3 m. The tube shall be readily visible
!
across its entire length for inspection after installation.
Danger: You must have the proper regulator and bottle in order for the appliance to operate
safely and efficiently. Use of an incorrect or faulty regulator is dangerous and will invalidate
any warranty.
Connect LP Gas cylinder
Before connecting, be sure that there is no debris caught in the head of the LP tank, head of
the regulator valve or in the head of the burner and burner ports.
Connect gas line to tank by turning knob clockwise until it stops, make sure that the tube is not
subject to twisting.
Do Not use this appliance with an adjustable regulator. We suggest use this appliance with
LP gas cylinder of 10 KG. The maximum diameter and the maximum height of the cylinder is
330 mm and 500 mm as shown in (Fig.1).
-8-
- 21 -
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
