CURE YOUR APPLIANCE WHEN NEEDED
If a fault occurs, before calling the after-sales service, please ensure that is not because
of incorrect operations and refer to the fault table, attempt to correct the fault yourself.
You can often easily rectify technical faults on the appliance yourself.
If a dish does not turn out exactly as you wanted, you can find many tips and instruc-
tions for preparation at the end of the operating manual.
Fault
Possible Cause
Faulty fuse.
The appliance
does not work.
Power cut
Knobs have
Knobs have
been acci-
fallen out of the
dentally
support in the
disengaged.
control panel.
Knobs can no
There is dirt
longer be
under knobs
turned easily.
Fan does not work all the time in
the mode: "Fan Heating"
After a cooking process a noise
can be heard and a air flow in the
near of the control panel can be
observed.
The food is not su cient cooked
in the time given by the recipe .
Notes/remedy
Check the circuit breaker in the fuse box.
Check whether the kitchen light or other kitchen
appliances are working.
Knobs can be removed.
Simply place knobs back in their support in the
control panel and push them in so that they engage
and can be turned as usual.
Knobs can be removed.
To disengage knobs, simply remove them from the
support.
Alternatively, press on the outer edge of knobs so
that they tip and can be picked up easily.
Carefully clean the knobs using a cloth and soapy water.
Dry with a soft cloth.
Do not use any sharp or abrasive materials.
Do not soak or clean in the dishwasher.
Do not remove knobs too often so that the support
remains stable
This is a normal operation due to the best possible heat
distribution and best possible performance of the oven.
The cooling fan is still working, to prevent high
moisture conditions in the cavity and cool down the
oven for your convenience. The cooling fan will
switch o automatically.
A temperature di erent from the recipe is used. Double
check the temperatures. The ingredient quantities are
di erent to the recipe. Double check the recipe.
Page 25/31