Sungrow SH5.0RT Gebruikershandleiding pagina 99
Verberg thumbnails
Zie ook voor SH5.0RT:
- Gebruikershandleiding (131 pagina's) ,
- Gebruikershandleiding (132 pagina's)
Inhoudsopgave
Advertenties
Gebruikershandleiding
Parameter
Name
Grid-connec-
tion type
Grid-connected
date
Owner's email
address
Postal code
Plant image
Feed-in tariff
Consumption
tariff
Stap 5 Bind a device through scanning the QR code on the device, manually inputting the device S/
N, or uploading a QR code picture. Tap Confirm after the QR code is identified or the S/N is
verified.
Description
The way the plant is connected to the grid, including 100% Feed-in,
Self-Consumption, Zero Export, and Off-grid.
The time when the plant is connected to the grid.
Fill in the owner information of the plant, and both registered and unre-
gistered email addresses are supported.
The postal code of the place where the plant is located.
Take photos of the plant and upload them.
The feed-in tariff can be set in two ways:
•
Enter the feed-in tariff directly in the input box.
•
Tap More Configurations, select the tariff unit, enter the feed-in ta-
riff, and tap Confirm. Enable Time-of-Use Tariff if needed. Tap
Add Time-of-Use Tariff, add time intervals and price, and tap Con-
firm. Please note that if Time-of-use Tariff is enabled, the time pe-
riods shall cover 24 hours a day, and can not overlap.
Set the consumption tariff as follows:
•
Tap More Configurations, select the tariff unit, enter the consump-
tion tariff, and tap Confirm. Enable Time-of-Use Tariff if needed,
and refer to the setting methods of the feed-in tariff.
7 Inbedrijfstelling
87
Advertenties
Inhoudsopgave
