2
appliance description
1.
Glass visor
2.
Control buttons
3.
Lighting
4.
Metal grease filters
5.
Motor housing
6.
Mount for carbon filter
7.
Lever for outside ventilation or
recirculation
3
before the first use
Before you use the appliance for the first time, please do as follows: Carefully unpack the appliance and remove all the packaging
material. Keep the material (plastic, polystyrene and cardboard) out of reach of children. Check the appliance after unpacking for any
damage, possible from transportation. Place the appliance on a flat and stable surface.
This appliance should be installed and connected to the power supply by a recognized fitter who is familiar with, and works according
to the correct safety regulations.
How to install the appliance, is instructed in the installation instructions (chapter 7).
The appliance must be connected with a properly installed fused socket. The power supply (AC) and voltage at the operating point
must correspond with the details on the rating label of the appliance.
EXTRACTION SYSTEM
This cooker hood can be connected in two ways: to a duct or as a recirculation hood. Install the
cooker hood according to the instructions depending on your choice.
VENT OUTSIDE - to a duct, the cooking vapours extracted by suction are carried outside, once the
grease particles have been filtered. This is the best method. Mount a flexible exhaust-air pipe on
the hood and turn the air distribution lever to the correct position - VENT OUTSIDE
RECIRCULATE - as a recirculation hood, the grease particles and the smell in the extracted
vapours are filtered. The air that has been sucked in is not carried outside but recirculates in the
kitchen. In this case you must have a carbon filter fitted. Place the supplied lid on the back of the hood and turn the air distribution
lever to the correct position - RECIRCULATE
Attention! The carbon filter is not included. You need to order it separately - article number 2KSF002.
18
•
English
1
5
2
3
4
7
6
VENT
OUTSIDE
RECIRCULATE