Download Inhoudsopgave Inhoud Print deze pagina

Inventum AKO6002 Gebruiksaanwijzing pagina 16

Verberg thumbnails Zie ook voor AKO6002:
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

• Never use the cooker hood as a working surface unless this is indicated
explicitly.
• If the cooker hood is used in combination with a gas hob ensure sufficient
ventilation.
• The outlet should not be connected to a flue duct used by other appliances.
• Never flambé under a cooker hood and clean the filters on time. To prevent
hot fat catching fire you should only deep fry under continuous supervision.
• The cooker hood should be cleaned regularly both on the outside as well
as the inside (at least 1 x a month). Insufficient cleaning or a delay in the
replacement of filters can cause fire hazard.
• The grease filters can become hot during use. After cooking wait at least 30
minutes before cleaning.
• Please note! Intensive use can lead to condensation on the cooker hood.
Condensation is simple to remove with a dry cloth.
• Grease and oil are inflammable when overheated. Remain in the cooking
area when preparing meals.
Fire danger! There is a risk of fire if the instructions for cleaning or
replacing grease filters and/or carbon filters are not followed.
Fire danger! through grease deposits in the metal grease filter. Never
work with open flame under the appliance (eg. flambéing). Always
use the appliance with the metal grease filter. Clean the grease filter
regularly.
Fire danger! through overheated fat or oil. Never extinguish a fire with
water; always use a fire blanket, lid or plate.
• The appliance may have sharp edges; please be careful during cleaning.
INSTALLATION
This appliance should only be connected by a registered installer.
• Always follow the installation instructions in the installation manual (chapter
7) provided.
• Check the appliance for transport damage. Do not connect a damaged
appliance.
• Faulty parts may only be replaced by original parts. The manufacturer can
only guarantee that original parts meet safety requirements.
• If the connecting cable is damaged, it may only be replaced by the
manufacturer, the manufacturer's service organisation or equivalently
qualified persons, in order to avoid dangerous situations.
• Always use the original cable and plug to connect the appliance.
16
English

Advertenties

Inhoudsopgave
loading

Inhoudsopgave