Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Factory reset
If your radio fails to operate or some digits on the display are missing or incomplete, carry out the
following procedure.
1. Press the Power On/Off button to switch on your radio.
2. Press and hold the Info/Menu button to access the menu for the current mode.
3. Rotate the Tuning control knob to select "System Setting" and press the Tuning control knob to enter
the system settings menu.
4. Rotate the Tuning control knob to select "Factory Reset" and press the Tuning control knob to enter
the setting.
5. Rotate the Tuning control knob to highlight "Yes" to proceed. If you do not wish to carry out a system
reset, highlight "No" and then press the Tuning control knob to confirm the setting.
6. With "Yes" highlighted, press the Tuning control knob. A full reset will be performed. All presets and
station lists will be erased. All settings will be set to their default values. After a system reset, the radio
will be restarted. The display will show "Welcome to Digital Radio" and a scan of the DAB band III will
be performed. In case of malfunction due to electrostatic discharge, reset the product (reconnection
of power source may be required) to resume normal operation.
Socket for software upgrade
From time to time, new software features for your radio may be developed. Your radio has therefore
been designed to allow its internal software to be updated using your USB upgrade port.
You should not attempt to update your radio unless it is recommended to you by Perfectpro Customer
Services. Updating the software may remove all radio station presets and settings from your radio.
Software updates for your radio may be available in the future.
As software updates become available software and information on how to update your radio can be
found at:
www.perfectpro.eu
For more information, please contact our Head Office by sending an email to info@perfectpro.eu
1. Using the micro USB cable (not supplied) to connect the USB socket in the battery compartment and
your PC.
2. With your radio switched on, press and hold the Info/Menu button to access the menu for the current
mode.
3. Rotate the Tuning control knob to select "System Setting" and press the Tuning control knob to enter
the system settings menu.
4. Rotate the Tuning control knob to select "Software Upgrade" and press the Tuning control knob to
enter the setting. The default setting is "No". Otherwise, rotate the Tuning control knob to choose "Yes"
and press the Tuning control knob. The display will show 'Waiting for PC wizard'.
5. Go to the website above to download the latest software. Follow the on-screen instructions on your
PC provided with the upgrade software to complete the software upgrade.
13
Advertenties
Inhoudsopgave
