Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Operation
Storing Food
To get the best results from your appliance, follow these instructions:
•
Only store foodstuffs in the appliance when it has reached the correct operating temperature.
•
Do not place uncovered hot food or liquid inside the appliance.
•
Wrap or cover food where possible.
•
Do not obstruct the fans inside the appliance.
•
Avoid opening the doors for prolonged periods of time.
Turn On
1. Close the door(s) of the appliance.
2. Ensure the power switch is set to [ О ] and turn on at the socket. Switch on the Power [|]. The current
temperature within the appliance is displayed.
WARNING! Never move the appliance during use.
The thermostat has been pre-set and in most case it is not necessary to adjust the settings.
When turning on the cabinet the display will show the current temperature in the cabinet.
Display set temperature
Press this key and the display will show the set temperature. Press the Key again to return to
normal reading.
Set new temperature:
Press this Key and the display shows the set temperature.
Press this key to increase the set temperature.
Pres this key to lower the set temperature.
Press this key to save the new settings. The display will flash with the new value and will then
return to normal reading.
Alarm codes:
PF1
Flashing in the display: indicates that the cabinet sensors is defective. The cabinet will strive to keep the set
temperature until it has been repaired
PF1
Flashing in the display: indicates that the cabinet sensors is defective. This does not influence the operation of
the cabinet, but should be repaired as soon as possible.
www.combisteel.com
7
Advertenties
Inhoudsopgave
Probleemoplossen
