Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
PROGRAMME THE MONOBLOCK RECIRCULATION FILTER HOOD
Programme (do the programming with the motor switched off):
Simultaneously press the + and the – keys for 5 seconds until the red LED flashes 5 times. The following functions have
now been enabled:
• The run-out time has been set to 30 minutes (instead of the default 10 minutes). Make use of the 30 minutes run-out
time.
• The cleaning indicator for the Monoblock recirculation filter has been set to 200 operating hours.
The red LED will light up after 200 operating hours. This indicates that the Monoblock recirculation filter needs cleaning
(see the instructions below).
Deactivate the programming (do the deactivate programming with the motor turned on):
Simultaneously press + and – for 5 sec. until the third green LED flashes 3 times. Attention! This is not recommended for
a cooker hood with recirculation.
Reset the Monoblock recirculation filter:
The cooker hood (motor) must be running! Simultaneously press + and – for 5 sec. until the red indicator lamp flashes 3
times for confirmation. If the programming is not carried out, the programming is automatically set after the chimney hood
has been switched on 10 times.
PROGRAMME THE MONOBLOCK RECIRCULATION FILTER DOWNDRAFT
Cleaning indication for Monoblock recirculation filter (only with recirculation)
1
Indication: White LED next to
After 200 cooking hours, the white LED adjacent to the
filter must be regenerated.
L
Follow the cleaning instructions as described in the chapter, Cleaning.
After the regeneration and after having replaced the Monoblock recirculation filter, reset the cleaning indication.
Reset: press the
control key for 3 seconds.
CLEAN THE MONOBLOCK RECIRCULATION FILTER
•
The Monoblock can be regenerated up to 12 times. This is done in the oven.
•
Place the filter in the oven for 1 hour at 120°C. Provide sufficient fresh air in the room where the oven has been
placed, as smells can be released. Smells can be released when baking certain kinds of fish. In this case it is best to
immediately regenerate the filter in the oven.
REPLACE THE MONOBLOCK RECIRCULATION FILTER
You can order a new Monoblock recirculation filter through Novy.
•
Monoblock recirculation: article number 830055
lights
symbol will light up (this indicates that the Monoblock recirculation
EN 10
Advertenties
Inhoudsopgave
