Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
8 Using as a steam cleaner in hand:
•
Push the release button (8) down and pull the hand held steam cleaner (B)
away from the steam mop body (C). （fig.11）
•
First attach the Direct Steam Nozzle onto the Hand Held Steam Cleaner
until it clicks into place.(fig.12)
Plug in the appliance to a grounded outlet. The main body indicator light
will flash.
Press the main body on/off switch (12)，the indicator light will
glow red，after 25 seconds, indicator light will change blue. To
change modes press the STEAM CONTROL button to selected either
DUST, MOP or SCRUB mode. You can change the steam mode while
the hand held steam cleaner is in standby or in use. Hold down the
steam trigger to start steaming. (fig.13)
CAUTION: Do not press the steam trigger until the Direct Steam
Nozzle is snapped into the main nozzle of your Hand Held Steam
Cleaner.
•
To remove the Direct Steam Nozzle, press and hold down the Release
Buttons. Then slide out the Accessory Hose using the grip. (fig.14)
NOTE：The Hand Held Steam Cleaner may continue to emit steam for a
few seconds after the trigger is released. This is normal, and the steaming
will eventually come to a stop.
9 Using Your Removable Hand Held Steam
Cleaner with Accessory Hose
•
To use the Accessory Hose, First attach
the Accessory Hose to the Hand Held
Steam Cleaner until it clicks into
place.(fig.15)
•
Select the desired cleaning tool for
use.
Follow
the
sub-assembly instructions for the
selected tool.
•
To remove the Accessory Hose, press and hold down the Release Buttons. Then slide out
the Accessory Hose using the grip.
CAUTION: Do not press the steam trigger while attaching or removing the Accessory Hose.
CAUTION: Do not use the Accessory Hose without cleaning tools attached.
cleaning
tool
41
Advertenties
Inhoudsopgave
