Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
13
Insert the side base frame (23) into the sleeve on the sandbag box (34).
14
1.
Reverse the whole sandbag.
2.
Insert the support pole (28) into the sleeve and bottom tube.
3.
Assemble four base support frame (24) and support pole (28) to sandbag box
(34).
15
1.
Attach the wheel carriage assembly (26) and base support frame (24) and sup-
port pole (28) using eight M8X55mm bolts (A7), six M8 arc washers (F1) and
eight M8 locknuts (C2). Repeat this step on the other side of the weight system.
Do not tighten the bolt yet.
2.
Then, attach the wheel carriage assembly (26) using an M8X55mm button bolt
(B1), an M8 washer (D2) and a M8 locknut (C2). Repeat this step on the other
side of the weight system.
16
1.
Assemble the adjustment foot (27).
2.
Attach the M10X65mm bolt (A12) , an M10X80 Bolt (A13), three M10 wash-
ers (D3), and two M10 locknuts (C3). Repeat this step on the other side of the
weight system.
Tighten all of the bolts in the above steps.
17
1.
Fill sandbags, about 55 KG.
2.
Attach the base and the main frame using three M10X102mm bolts (A8) , three
M10 arc washers (F2) and three locknuts (C3) .
3.
Rotate the main frame assembly so that the base stands horizontally on the floor,
and then place a bag of sand.
18
Distinguish struts (29, 30, 31 and 32) to base frame.
Galaxy
Basketball Systems
13
Advertenties
Inhoudsopgave
