Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
handleiding
7.
Programming the water timer
Time display
There are 2 different time displays.
1. 12 hour display. The digital display runs from 0.00 to 12.00 with AM and PM on the display.
2. 24-hour display. The digital display runs from 0.00 to 23.59.
To change the time display from 12-hour to 24-hour or vice versa, press and hold the CLOCK button until the
display changes.
Setting the time
1.Press and hold the SET button until a day of the week starts flashing.
Use the V button to select the current day and press SET.
3.Now the hours will flash, select the current hour and press SET.
4. Now the minutes will flash, select the current minute and press SET.
Setting the watering times.
1. Press and hold the AUTO button until "1 on" appears in the display.
2. Press the SET button and the days of the week will begin to flash. Press the AUTO button until all days of the
week flash, then press SET.
3. Now the hours will flash. With the AUTO button you can select the hour of the first watering. Then press
SET.
4. Now the minutes will flash. Using the AUTO button you can select the minute of the first watering. Then
press SET.
You have now set the first switch-on time for the irrigation pump.
5. Press the AUTO button until "1 off" appears in the display and then repeat steps 2 to 4. If you have set the "1
on" position to 12:00, you must set the "1 off" position to 12:01.
You have now set the first shut off time for the irrigation pump.
Repeat these actions to set the other on and off moments.
6. Press ON/OFF until "AUTO" appears in the display.
7. Plug the feed pump into the timer.
www.g-tools.nl
Advertenties
Inhoudsopgave
