Advertenties
Beschikbare talen
Beschikbare talen
•
Trouble shooting:
The table below provides an overview of the common errors and maintenance methods of this mobile
air conditioner with energy storage. If the machine is not functioning properly , simple diagnosis and
maintenance can be performed via the table below. Contact professional service personnel if it still
cannot be resolved.
Issue
Air conditioning is not
working
Poor cooling (heating)
effect
of
conditioning there
The air conditioner is
noisy
Compressor
working
During cold storage,
creates the formation
of condensation on the
front and rear panels
Possible reason
Power is not on
Cooling,
heating do not start
Waiting time of three minutes after
switching
heating.
The doors and windows are open and
air
there is cold or heat leakage in the
room. There are other heat sources
(cold sources)
The filter is dirty
Air inlet or outlet is blocked or there
is poor air circulation
Air conditioner is not leveled or is not
stable
Compressor delay protection enabled Wait longer than 3 minutes
is
not
In cooling mode, if the water
temperature does not reach the
compressor start state, the water
cycle is used for cooling and the
compressor does not start at this
time.
When the humidity is high and the
water vapor in the air is cold, may
dew
condensation
conditioning
dehumidification
and
between
cooling
and
on
the
air
Solution
Turn on the power
Check whether the set
temperature
has
been
reached
Wait more than three
minutes.
Close the door or window
and
remove
the
source (cold source)
Clean or replace the filter
Remove the blockage from
the air inlet or outlet
Place the air conditioning
on a flat and solid surface
and switch on the air
conditioner
after
temperature has dropped
When the water cycle
cooling is complete, the
compressor
automatically started for
cooling
It is not an error, you can
continue to use it, check
whether
you
have
switched off the
removal function.
heat
the
is
dew
Advertenties
