Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Installation
General
The fitting of the appliance should only be
carried out by a registered Corgi gas fitter.
The appliance is not connected to the flue gas
outlet channel.
Electrical connection 230 V - 50 Hz.
The electrical connection must comply
with national and local regulations. For the
Netherlands this includes the NEN 1010
amongst other standards.
Wall socket and plug must be accessible at
all times.
Gasconnection: RC 1/2" (ISO 7/1-RC 1/2)
The gas connection must comply with
national and local regulations. For the
Netherlands this includes the GAVO
regulations (NEN 1078). Amongst other
things these regulations instruct that:
– only approved materials are to be used.
Attention:
The type of gas and the country for which the
appliance has been designed are indicated on
the ratings plate. The appliance is set in the
factory for G25 (natural gas) with a pressure
of 25 mbar. Appliance category 12L.
Table burner information
Combustion with G25 low setting
Rating nominal
Burner position
Burner
Diameter [mm]
Flow [l/h]
Gas type
Rating nominal (kW)
Rating minimal (kW)
GB 20
Dimensions
850
Rear left
Rear right
Semi rapid
Semi rapid
94
94
193,8
193,8
G25/25mbar
G25/25mbar
1,75
1,75
0,52
0,52
Connect the oven directly to the mains.
This is because the oven can reach high
temperatures. It can also be connected
with a specially designed gas hose. Attach
this hose at the side of the oven to prevent
it touching any hot parts. A gas tap, which
is easily accessible, should always be
used for the appliance.
500
(EFG607H)
600
(EFG667/687/688/689V
front view
Front right
Front left
Simmer
Rapid
72
125
110,7
332,2
G25/25mbar
G25/25mbar
1,00
3,00
0,30
0,75
600
)
side view
fig. 10
FL (EFG688/689V)
Wok
148
420,82
G25/25mbar
3,8
1,6
Advertenties
Hoofdstukken
Inhoudsopgave
