Advertenties
Beschikbare talen
Beschikbare talen
Troubleshooting
The follow overview will help you understand possible problems. However, only qualified engineers should
attempt to open or repair the machine. Contact your supplier when in doubt.
Problem
The appliance does not work.
The appliance has stopped
working.
The appliance does not mix
properly
The appliance makes a lot of noise
Cleaning and Maintenance
•
Maintenance and repairs should only be done by certified engineers.
•
Regularly check and clean the appliance, its parts and accessories (if aplicable).
•
Regularly check the power plug and power cable for damage. If either is damaged do not use the appliance.
Instead, have it repaired by a certified electrical engineer.
•
Always switch off and disconnect the power supply before cleaning or maintenance.
•
Regularly check if the bowl connection, transmission and gearbox are sufficiently lubricated. If required
apply new grease (remove the top cover to gain access to the transmission and gearbox). Doing so will
prolong life expectancy and guarantee smooth operation.
•
Regularly check the tension of the drive chain. If loose, tighten it.
•
ATTENTION! Never use aggressive cleaning agents or abrasives. Do not use solvents or petrol based cleaning
agents. Some cleaning agents may leave harmful residues or cause damage to the machine.
•
Clean the machine using a damp cloth, warm water and a mild food safe detergent mixture. Always dry the
appliance and accessories after cleaning using a soft cloth.
•
ATTENTION! Do not use any scourer and sharp or pointed objects during cleaning, this may cause damage
to the machine.
•
ATTENTION! Never hose down the machine or immerse it in water or any other liquid, instead wipe the
exterior with a damp cloth. Do not use a steamer to clean the appliance
•
ATTENTION! Never let the power cable or power plug get wet or damp.
Spangenberg International B.V. – Nijverheidsweg 19F – 3641 RP Mijdrecht – Holland – T. +31 (0) 297 253 969 – F. +31 (0) 297 256 445
Possible Cause
▪
The appliance is switched off.
▪
The power supply is
interupted.
▪
The voltage is not correct.
▪
Safety guard not closed
properly.
▪
Motor overheated
▪
Overload.
▪
Overload.
▪
Bowl or spiral damaged.
▪
Bowl mounted incorrectly.
▪
Insufficient lubrication.
▪
Drive chain is loose.
▪
Bowl or Spiral damaged.
▪
Bowl mounted incorrectly.
info@maximaholland.com
-
www.maximaholland.com
Possible Solution
➢ Switch on the appliance.
➢ Check the power supply, plug
in power cable.
➢ Use another power source.
➢ Close safety guard.
➢ Let appliance cool down and
reduce load (weight/time).
➢ Reduce load.
➢ Reduce load.
➢ Replace part.
➢ Check bowl.
➢ Lubricate required parts.
➢ Tighten drive chain.
➢ Replace part.
➢ Check bowl.
Advertenties
