Advertenties
Beschikbare talen
Beschikbare talen
•
Always pull the power plug out of the socket when the machine is not being used.
•
ATTENTION! As long as the power plug is in the socket the machine is connected to the power source.
•
Keep all packaging away from children. Dispose of packaging in accordance to the regulations of local
authorities.
•
Turn off the machine before pulling the power plug out of the socket.
•
Never try to move or carry the machine by the power cord.
•
Do not use any extra devices that are not supplied along with the machine.
•
Avoid overloading the machine.
•
Do not place the machine on its side, upside-down or tilt the appliance more than 45° from the vertical. Also
while the appliance is being transported.
•
The electrical installation must satisfy the applicable national and local regulations.
Features
Certifications: All Maxima machines are CE certified.
Motors: All Maxima machine motors are designed specifically for heavy duty mixing applications.
Transmission: All Maxima gears and shafts are made of quality steel which is precision machined. The gears are
packed in long lasting grease lubricant ensuring extremely quiet operation and a long life
Controls: All Maxima mixers have a separate start and stop button so that operators can easily stop the machine
in an emergency situation. The speed can be adjusted by using the speed button or handle.
Safety Features
The machine is fitted with the following safety features, designed to protect the user and the machine against
injury or damage:
Safety Guard: The safety guard must be closed completely in order to activate the mixer. If the safety guard is
not closed properly the mixer will not start. If the safety guard is opened during use the mixer will switch off
automatically.
Overheat Protection: The motor is fitted with a safety switch which will automatically switch off the machine if
the temperature exceeds maximum operating limits. If this happens then the machine should be left off for a
minimum of 60 minutes in order to allow the motor to cool down. After the cool down period the user can
restart the machine.
Overload Protection: The machine is fitted with an overload protection switch which will activate if the load is
too heavy.
Spangenberg International B.V. – Nijverheidsweg 19F – 3641 RP Mijdrecht – Holland – T. +31 (0) 297 253 969 – F. +31 (0) 297 256 445
info@maximaholland.com
-
www.maximaholland.com
Advertenties
