Download Inhoudsopgave Inhoud Print deze pagina

Communicatie Specificaties; Fysieke Specificaties; Installatie; De Apparatuur Uitpakken - Visonic POWERMAX EXPRESS Technische Installatie Handleiding

Verberg thumbnails Zie ook voor POWERMAX EXPRESS:
Inhoudsopgave

Advertenties

Current Drain: Approx. 70 mA standby, 1600 mA peak at
full load.
Minimum battery voltage: 4.8V
Note: For CE compliance the battery backup period shall
exceed 12 hours.
Backup Battery Pack: 4.8V 1300 mAh, rechargeable
NiMH battery pack, p/n GP130AAM4YMX, manufactured
by GP or equivalent.
Note: For compliance with UL standards the battery
backup period shall exceed 24 hours.
Backup Battery Pack: 4.8V 2200 mAh, rechargeable
NiMH battery pack, p/n GP230AAHC4YMX, manufactured
by GP.
Battery Test: Once every 10

2.4 Communicatie specificaties

Ingebouwd modem: 300 baud, Bell 103 protocol
Data verbinding naar lokale PC: via seriële poort
(RS-232)

3. INSTALLATIE

3. INSTALLATIE
3. INSTALLATIE
3. INSTALLATIE
Note: This system must be checked by a qualified
technician at least once every three (3) years.
This equipment is designed to be connected to the telephone
network using RJ11 connector which complies with Part 68
rules and requirements adopted by ACTA and properly
installed RJ31X connector. See drawing below for details.
The REN is used to determine the number of
Note:
devices that may be connected to a telephone line.
Excessive RENs on a telephone line may result in the
devices not ringing in response to an incoming call. In
most but not all areas, the sum of RENs should not
exceed five (5.0). To be certain of the number of devices
that may be connected to a line, as determined by the
total RENs, contact the local telephone company. The
REN of alarm system is part of the product identifier that
has the format US:VSOAL03BPMEXPRESS.
Connection to telephone company provided coin service is
prohibited. Connection to party lines service is subject to
state tariffs.

3.1 De apparatuur uitpakken

Open de doos en controleer of alle onderdelen aanwezig
zijn. Indien er iets ontbreekt neem dan direct contact op
met uw leverancier.

3.2 Voeding aansluiten

Het is raadzaam om alle draadloze componenten van
tevoren in te leren op de werkbank voordat het systeem
wordt geïnstalleerd. Hiervoor moet de PowerMax Express
tijdelijk op het lichtnet worden aangesloten (zie figuur 3.1f
bij interne stroomvoorziening of in figuur 3.1g bij externe
4
seconds.
Doormelding: 2 meldkamernummers, 4 privé-telefoons
Protocol: SIA, Pulse 4/2 1900/1400 Hz, Pulse 4/2
1800/2300 Hz, Contact ID, Scancom.
Pulssnelheid: 10, 20, 33 en 40 pps - programmeerbaar
Berichten naar privé nummers: toon
Ring Detection: The unit does not support ring detection
without DC voltage present on the telephone lines.

2.5 Fysieke specificaties

Werktemperatuur: -10° C tot 49° C
Opslagtemperatuur: -20° C tot 60° C
Vochtigheid: 85% relatieve vochtigheid, @ 30° C
Afmetingen: 193 x 178 x 50 mm
Gewicht: 658 gram incl. batterijen
Kleur: wit
In the case that RJ31X is not available (consult your
telephone company or a qualified installer), the telephone
line should be connected to the PowerMaxExpress unit
first and then all other home equipment should be
connected to PowerMaxExpress "Phone" outlet.
stroomvoorziening).
U
aansluiten, zoals wordt weergegeven in figuur 3.1h.
kunt
ook
het
batterypack
D-302775

Advertenties

Inhoudsopgave
loading

Inhoudsopgave