Foutcode
Beschrijving
Err.006
No Frequencies Found
Err.007
Firmware Version Self-Test Failed
Shure SB900 battery runtime does
Err.008
not appear on display
Err.009
Transmitter Type Mismatch
Err.010
Battery Hot (Warning)
Err.011
Battery Hot Shutdown
Contact opnemen met de klantenservice
Niet gevonden wat u zocht?
Accessoires
Optionele accessoires
Batterijen en laders
Oplaadbare Shure lithium-ion batterij.
Oplossingen
Rescan or use WWB to find a frequency.
Use the Shure Update Utility to update the unit to the latest firmware. If
the error persists, contact Shure Support.
Check that battery is firmly installed into the battery compartment. If
condition persists, replace the battery.
To complete the firmware update, match the type of transmitter to the
type of firmware the receiver currently has.
HH BP = handheld or bodypack firmware
BN GN = gooseneck or boundary firmware
Remove the transmitter from any possible external heat sources. Let
the device cool itself down. Consider swapping the battery to continue
operation.
All batteries should be stored and operated away from external heat
sources in reasonable temperature conditions for best performance.
If the condition persists, contact Shure support.
Let the device cool itself down and then consider swapping Swap the
battery to continue operation.
All batteries should be stored and operated away from external heat
sources in reasonable temperature conditions for best performance.
Identify any possible external heat sources to the transmitter and ope
rate the transmitter away from those external heat sources.
If the condition persists, contact Shure support.
Neem voor hulp contact op met onze
klantenservice.
SB900B
Shure Incorporated
43/58