Advertenties
Beschikbare talen
Beschikbare talen
5.2.
Display screens after switching on
5.2.1.
Display screens after switching on
Step
Display screen
8.8.8.8.
1
F 1.0 0
2
t C.S
3
20
4
5.2.2.
"Heating" display in firing mode
Display screen
Indicator
.
3 1 0
Indicator
Description
•
After switching on, the controller carries out a display test.
•
All indicators light up.
•
The controller will sound a short beep.
•
The controller displays the version number of the integrated
software.
•
When contacting technical customer support, you will need the
following:
the version number
the serial number of the device
•
The thermocouple type setting is now displayed.
•
The type stored here must correspond to that of the
thermocouple installed in the kiln, i.e. S, R, K or N type.
•
The final display shows the kiln temperature.
•
No other indicators should light up during this time.
Description
During firing, the illuminated (decimal) point to the right of the temperature
("310") in the display shows that the kiln is heating up.
57 / 384 - EN -
Advertenties
