DO7082S
Lift it up gently on one side and open the lid to drain water from the bottom of the
device. Using the screwdriver supplied (attached to the appliance) you can loosen the
screw and empty the appliance.
Pour one cup of tap or filtered water through the boiler underneath hole.
Shake the appliance gently, then empty out all the water.
Repeat this operation until the water from the boiler comes out clear and clean.
Pour 100 ml of water in the boiler. Leave the water in the boiler, to prevent the
boiler from getting damaged.
Afterwards, carefully fasten the screw and return the appliance to an upright position.
If you will not use the appliance for an extended period, empty the water tank and
place the iron in the insulation pad. Pull out the cord clamp, wind both cords around
the groove specially made for this purpose at the bottom of the appliance and push the
cord clip back into place.
IRONING TIPS
Always check whether there is an ironing label in clothing. Always follow these
Symbol
instructions. Use in other cases the table below.
The iron will heat up faster than it cools off. Sort the clothing to be ironed according
to type of fabric and temperature and start with the items that require the lowest
setting. If the garment consists of several substances, always choose the lowest
appropriate temperature. Silk and other substances will shine when ironed. It is
recommended to iron them on the inside.
It's best to iron velvet and other fabrics that quickly start to shine in one direction
using little pressure on the iron. Keep the iron moving when ironing these fabrics.
Pure wool fabrics may be steam ironed. Preferably use an ironing cloth between the
iron and fabric. Iron the clothing on the inside in order to prevent shine.
Never iron directly over zips, metal buckles or buttons. This will damage the soleplate.
Fabric
Temperature
Synthetic and
silk
Wool
Cotton an
Linen
Do not iron this fabric
Variable steam
24
www.domo-elektro.be
No
Yes
Yes