Dell Alienware 17 R4 Onderhoudshandleiding pagina 83
Verberg thumbnails
Zie ook voor Alienware 17 R4:
- Onderhoudshandleiding (138 pagina's) ,
- Installatiehandleiding (20 pagina's) ,
- Installatiehandleiding (19 pagina's)
Advertenties
Main
M.2 PCIe SSD-3
Table 4. System setup options—Advanced menu
Advanced
Intel(R) SpeedStep Technology
Virtualization
VT for Direct I/O
Integrated NIC
USB Emulation
USB PowerShare
USB Wake Support
SATA Operation
Adapter Warnings
Function Key Behavior
Express Charge
Displays the type of third SSD installed.
Allows you to enable or disable Intel (R) Speedstep
Technology.
NOTE: If enabled, the processor clock speed and core
voltage are adjusted dynamically based on the processor
load.
Default: Enabled
Allows you to enable or disable the Intel Virtualization
technology.
Default: Enabled
Specify whether a Virtual Machine Monitor (VMM) can utilize
the additional hardware capabilities provided by Intel
Virtualization Technology for Direct I/O.
Allows you to enable or disable the on-board LAN controller.
Default: Enabled
Allows you to enable or disable the USB emulation feature. This
feature defines how the BIOS, in the absence of a USB-aware
operating system, handles USB devices. USB emulation is
always enabled during POST.
NOTE: You cannot boot any type of USB device (floppy,
hard drive, or memory key) when this option is off.
Default: Enabled
Allows you to charge USB devices when the computer is turned
off or in standby mode.
Default: Enabled
Allows you to enable USB devices to wake the computer from
standby or to disable the USB wake support feature.
NOTE: If USB PowerShare is enabled, a device
connected to the USB PowerShare connector may not
wake the computer.
Default: Disabled
Allows you to configure the operating mode of the integrated
SATA hard drive controller.
Default: AHCI
Allows you to choose if the computer should display warning
messages when you use AC adapters that are not supported by
your computer.
Default: Enabled
Allows you to set function key or multimedia key as the default
function key behavior.
Default: Function key
Allows you to charge your computer battery using Standard
Charge or Express Charge mode.
Default: Express Charge
83
Advertenties
