Advertenties
Beschikbare talen
Beschikbare talen
· Avoid very moist places. Too much moisture in the air will cause frost to from very quickly
on the evaporator, and your freezer.
· Before connecting your freezer to the power supply, check that the voltage stated on the
rating label of your appliance corresponds to the voltage in your home. A different voltage
could damage the appliance.
· The appliance must be grounded. The manufacturer is not responsible for damages that
may occur as a result of usage without grounding.
· For uneven surfaces, front feet can be aligned.
· After installation, leave the freezer for 24 hours before turning it on. This way the
refrigerant can settle.
· Allow the appliance to run empty for 12 hours so the compartment can cool to the
appropriate temperature.
· The appliance may only be used indoors.
· The freezer makes noise when the compressor pumps the coolant. This is normal.
· The climate class indicates the minimum and maximum ambient temperature for the
proper operation of an appliance. You can find the climate class on the type plate on the
back of the appliance.
· SN: Subnormal: ambient temperature between 10°C and 32°C
· N: Normal: ambient temperature between 16°C and 32°C
· ST: Subtropical: ambient temperature between 16°C and 38°C
· T: Tropical: ambient temperature between 16°C and 43°C
MOUNTING THE HANDLE
1.
Remove the screws (5x) from the lid of the freezer with a cross-head screwdriver.
2.
Mount the handle with lock on the lid of the freezer and fasten it with the 5 screws.
3.
Place the cover on this handle.
USE
TEMPERATURE CONTROL
· Press the "SET" button to set the temperature. Pressing this button will raise the
temperature by one on the scale. The scale goes from "MIN" to "MAX", with MAX being
the coldest setting. This scale works in a cycle. 5 seconds after the setting you selected has
been reached, the freezer will switch to this temperature setting.
www.domo-elektro.be
35
DO935DVK
Advertenties
