Advertenties
EN 24
For washing the inside of the cutting deck and the
collector channel the machine must be on firm
ground:
1. fit the grass-catcher;
2. connect a water hose to its pipe fitting (1), and
run water through it;
3. sit at the operator's position;
4. lower the cutting deck completely;
5. start the engine and stay in neutral;
6. engage the blade and leave it to turn for a few minutes.
Take off the grass-catcher, empty and rinse it, then put it in a position where it
can dry quickly.
Put the machine away in a dry place protected from the weather and, if possible,
cover it with a cloth.
5.4.11 I
NACTIVITY FOR LONG PERIODS
WARNING!
!
collected around the engine or silencer to prevent their catching fire the
next time the machine is used!
If the machine is likely to be unused for a long period (more than 1 month), follow
the instructions in the engine manual. Lubricate all joints as indicated (☛ 6.2.1).
➤
In the electric start models:
Disconnect the connectors (2 and 3) of the
battery (1).
IMPORTANT
in a cool and dry place. Before a long stor-
age period (more than 1 month), always
charge the battery, and then recharge
before using again ( ☛ 6.2.5).
Empty the fuel tank by disconnecting the tube situated at the inlet of the fuel fil-
All manuals and user guides at all-guides.com
Carefully remove any dry grass cuttings which may have
The battery must be kept
HOW TO USE THE MACHINE
1
1
2
3
Advertenties
