Advertenties
Slimline
English
1. User instructions
1. Window display
1.1 The five-function window display shows "STEPS" for 10 seconds, then transitions every 5 seconds
to display the following categories: TIME, SPEED, DISTANCE, and CALORIES.
1.2 The treadmill will emit a sound when the user reaches 5,000 and 10,000 steps.
1.3 "TIME": Displays the running or countdown time. Format: 0:00:00 (Hours: Minutes: Seconds). After
60 minutes, the time display will show 1:00:00.
1.4 "SPEED": Displays the current speed.
1.5 "DISTANCE": Displays the movement distance.
1.6 "CALORIES": Displays the calorie consumption value. In standby mode, the calorie value displays
as 0.
2. Button functions
2.1 "Start" button: In standby or countdown mode, press this button to start the treadmill. The default
speed is 1.0 km/h. Pressing this button during a preset program will make the treadmill run
according to the preset values.
2.2 "Stop" button: In motion mode, press this button to slow down the treadmill, stop motion, and
return to the standby interface.
2.3 Armrest "Start/Stop": A short press pauses, and a long press for three seconds stops the treadmill.
A short press during pause mode displays a 30-second countdown on the electronic watch
screen, allowing the user to end the exercise, with all data resetting to zero. During the 30-second
countdown, a short press of the "Start/Stop" button restarts the exercise, retaining the previous
exercise data. Long press during the countdown for three seconds ends the exercise and resets
all data to zero. The "Start/Stop" button in the middle of the remote control does not have a pause
function; it directly slows down and stops the treadmill.
2.4 "Speed +/-": Speed increase and decrease buttons adjust the speed.
2.5 "P" program key: In standby mode, select and switch between 12 fixed programs (P01~P12), then
return to the standby interface (only 6 fixed programs, P01 to P06, are available in treadmill
mode).
2.6 "M" mode key: Switch between 4 countdown modes in standby mode. The default step countdown
is 5,000 steps (range: 1 ~ 40,000 steps, increase or decrease by 1,000 steps). The default time
countdown is 30 minutes (range: 30:00 ~ 9:30:00, increase or decrease by 5 minutes). The default
distance countdown is 1.00 km (range: 1.00 ~ 90.00 km, increase or decrease by 1 km). The
default calorie countdown is 50 kcal (range: 50 ~ 990, increase or decrease by 10 kcal). Use the
"Speed +" and "Speed -" buttons to adjust the settings.
2.7 "3/6": Speed shortcut keys for 3 km/h and 6 km/h.
3. Functional Mode Description
3.1 Sports Mode: Press the START button to start quickly, the SPEED window displays "3 2 1 0", the
treadmill time counts up (0:00~99:59, overflow can be from 1:00:00 hours : minutes: seconds,
continue to accumulate time), the default speed is 1.0km/h, press the speed plus or minus,
shortcut keys to adjust the speed. Press the stop button to stop.
3.2 Countdown mode (M1- M4): In standby mode, press the MODE button to select M1 step
countdown (the default is 5,000 steps , which can be adjusted by pressing Speed + or Speed- ,
increasing or decreasing by 1,000 steps), M2 time countdown (the default is 30:00, increasing or
decreasing by 5 minutes each time. M3 distance countdown, M4 calorie countdown (the default is
50 kcal, increasing or decreasing by 10 kcal each time). Set the relevant value with the speed plus
or minus button, and press the "Start" button to start. The treadmill will start counting down
according to the set value. When the countdown reaches 0, the treadmill will automatically stop
and reproduce the initial target setting value. It will flash for 10 seconds, indicating that the target
has been achieved, so that users can take photos and share them conveniently. Then "End" will
be displayed in the corresponding window, and the treadmill will enter standby mode after 3
seconds.
3.3 Fixed program settings:
3.3.1
Fixed program mode (P01~P12 ): a mode from P01 to P12 , use the speed plus and minus
keys to set the time (time range 1:00~99:00, default 30:00), press the START key to execute
the program, the treadmill will move according to the pre-set value of the fixed program, and
Manual – Treadmill – Focus Fitness Slimline
16
Advertenties
