Inhoudsopgave
Advertenties
• Warning: Micro-organisms that may be
present in the water or in the environment
where the appliance is used or stored,
can grow in the water reservoir and be
blown in the air causing very serious
health risks when the water is not
renewed and the tank is not cleaned
properly every 3 days.
Hygro+'s humidifier function lets you adjust the humidity level in the room in which it is installed.
N.B.: The recommended humidity level for your child's bedroom is between 40 % and 50 %.
MANUAL MODE
- Remove the humidifier cover (1) and remove the essential oil diffuser (2).
- Remove the water tank (3) from the humidifier base.
- Turn over the tank and unscrew the valve (4).
- Fill the tank with tap or distilled water.
N.B.: cold water - maximum 2.5 l.
- Close the valve (4) tightly, then turn the water tank over and set on the humidifier base.
N.B.: wait a few seconds before the base of the humidifier is filled with water. The Babymoov logo on the water tank must be
facing outward.
- Replace the essential oil diffuser (2) in the centre of the chimney, and replace the cover (1) on the water tank.
N.B.: the essential oil diffuser must be positioned point down.
- Plug your Hygro+ humidifier into a wall outlet using the power cord, and press the ON button
- Select the desired quantity of vapour using the +/- keys, then point the vapour in the desired direction using the cover (1).
st
- 1
level: steam flow rate = 110 ml/hour
nd
- 2
level: steam flow rate = 150 ml/hour
rd
- 3
level: steam flow rate = 180 ml/hour
th
- 4
level: steam flow rate = 220 ml/hour
- 5
th
level: steam flow rate = 250 ml/hour
The steam flow rate is automatically reset to the last setting when the humidifier is unplugged or turned off.
N.B.: ensure that the vapour is not directed toward a wall socket or other electrical device.
- Your Hygro+ humidifier is ready to use! It's already producing pure, cool vapour throughout the entire room.
- To shut off the humidifier, simply press the OFF button
N.B.: after 30 seconds of inactivity, the screen automatically switches to stand-by mode. To reactivate it, simply press the ON
button.
WATER QUANTITY AND TIME OF USE
N.B.: the amount of water in the water tank determines how long the humidifier will run.
The Hygro+ humidifier is designed for 22 hours of maximum autonomy.
The water level indicator
SETTING THE HYGROMETRY LEVEL
Press
during 3 seconds to set the automatic stop of Hygro+.
auto
- «90%» flashes. Press + /- to select the appropriate hygrometry level.
- Press
for 3 seconds to enter the setting and activate the setting.
auto
becomes blue. The current humidity level of the room is displayed.
auto
Your Hygro+ humidifier will automatically stop once the requested humidity level is reached.
Press briefly
to check the setting.
auto
The hygrometry level is displayed for 3 seconds.
How to change the setting:
- Press
for 3 seconds. The last setting flashes on the display.
auto
- Press + /- to select a new hygrometry level.
- Press
for 3 seconds to enter and activate the new setting. .
auto
becomes blue. The current hygrometry level of the room is displayed.
auto
HUMIDIFIER FUNCTION
turns on when there is insufficient water in the tank.
HYGRO + • Instructions for use
• Electric equipment is subject to a selective
collection procedure. Do not throw away
electrical and electronic equipment waste
with the unsorted municipal refuse, but
carry out a selective collection.
Throughout the European Union
this symbol indicates this product
must not be thrown in the dustbin
or mixed with domestic waste but
undergo selective collection.
.
.
11
Advertenties
Inhoudsopgave
