Download Inhoudsopgave Inhoud Print deze pagina

Transport; Storage; Guarantee; Description Of Device / Spare Parts - ATIKA BMS 250 Oorspronkelijke Gebruiksaanwijzing

Inhoudsopgave

Advertenties

Transport

Remove mains plug before each
transport.
The saw must only be transported with the saw blade
lowered and the protective cover in position.
This will avoid possible injury from the saw blade.
The frame can be folded down for transport.
L1
Lift the saw on the side with the transport wheels.
1. Loosen the catch by pulling the frame down.
2. Fold the frame against the underside of the saw until it
latches.
L2
1. Place the saw down.
2. Tip the saw until it is lying on the transport wheels (18) and
the rubber feet (20).
L3
1. Disengage the latch by pushing the frame together.
2. Fold the frame against the underside of the saw until it
latches.
L4
For transport, pull out the transport handle (29).

Storage

Remove the mains plug from the socket.
Store unused equipment in a dry, locked place out of the
reach of children.
To extend the service life of the saw and guarantee smooth
operation, before storing for a longer period
− thoroughly clean the saw
− treat all movable parts with an environmentally friendly
oil
Never use any grease!
To save storage space, the saw frame can be collapsed.

Guarantee

Please observe the enclosed terms of guarantee.
All manuals and user guides at all-guides.com
26
Description of device /
spare parts
Pos. Denomination
Bench length extension
1
Bench plate
2
Transverse stop complete
3
3A
Fence
Fence holder
3B
4
Extraction hose
Safety guard
5
6
Table insert
Longitudinal stop cpl.
7
Fence
7A
Holding plate
7B
Clamping lever for longitudinal stop
8
Scale for longitudinal stop
9
Scale for cross-cut adjustment
10
Crank for height adjustment
11
Handwheel for cross-cut adjustment
12
Set screw for saw blade
13
On/Off switch
14
15
Motor protection
Folding frame
16
17
Adjusting foot
Transport wheel
18
19
Cable winder
Rubber foot
20
Bench width extension with rubber feet
21
Bench width extension
21A
Saw blade
22
Splitting wedge
23
Supports for table extension
24
25
Holder for saw blade
Dust extraction port
26
27
Holder 1 for sliding stick
Holder 2 for sliding stick
28
29
Transport handle
Sliding stick
30
31
Holder for cross stopper
32
Set screw
Compression plate
33
Counter-plate (plastic)
34
Saw blade flange
35
Short brace
36
Long brace
37
Order No.
363200
363201
362863
362824
363202
363203
}
363205
363206
362802
363208
363209
363210
363211
363212
362854
363213
363214
363207
363215
362872
363204
363216
363217
363218
363850
363851

Advertenties

Inhoudsopgave
loading

Inhoudsopgave