Inhoudsopgave
Advertenties
Set up your Wi-Fi network and Google account
If you are using an Android phone for setup, select
≥
[Continue]. You can then easily transfer your Android
phone's Wi-Fi network and Google account to your
TV.
≥
If you are not using an Android phone for setup, select
[Skip], then complete settings on the setup screen
which appears next.
Select your country
Enter the PIN number for parental controls
Select your tuner mode
≥
When [Satellite] has been selected, follow the on-
screen instructions to set the satellite type and other
details.
Run a channel scan
Select [Home]
Select [Home] for use in a home viewing environment.
[Shop] is for shop display.
≥
To change the viewing environment later on, the set
≥
will need to have all settings initialised by accessing
[Reset].
Initial Setup is now complete and the
TV is ready for viewing.
If tuning has failed check the Satellite cable, RF cable,
and the network connection, and then follow the on-
screen instructions.
Note
The TV goes into Standby mode when no operation is
≥
performed for 4 hours if [Switch Off Timer] in the
Power menu is set to [240 Minutes] (factory setting).
The TV goes into Standby mode when no signal is
≥
received and no operation is performed for 10 minutes
if [No Signal Power Off] in the Power menu is set to
[10 Minutes] (factory setting).
To retune all channels
≥
[Channel Scan] (Settings > Channel > Channels)
To switch the TV signal mode later
≥
[Channel Installation Mode] (Settings > Channel)
≥
To initialise all settings
[Reset] (Settings > Device Preferences > About)
Watching TV
1
Turn power on
(Bottom of the TV)
or
(Remote Control)
Mains power On / Off switch should be on.
≥
(p. 18)
2
Select TV
TV
3
Select a channel
up
down
or
To select a channel position with 2 or more-digit, e.g.
≥
399
19
English
Advertenties
Hoofdstukken
Inhoudsopgave
