Inhoudsopgave
Advertenties
GB
Grating and shredding attachment (XI)
The attachment has a separate body and a separate pusher.
Install the attachment body into the drive socket.
Slide the drum into the body. The openings in the drum are very sharp and must be handled with care to avoid injury.
The attachment axis tabs should align with the notches in the opening in the rear wall of the drum (XII).
Secure the drum with the attachment ring (XIII). Place the ring on the front part of the attachment body so that the marker on the
front wall of the body shows the symbol of an open padlock. Then rotate the ring so that the marker shows the closed padlock
symbol. Check that the ring cannot be pulled off the attachment body.
Check that the pusher can be easily inserted and removed from the inlet opening.
Caution! Do not use the grinder attachment pusher in this attachment.
The product is equipped with three types of drums. Two drums with round openings are used for grating. The larger the openings,
the larger the shavings. The drum with rectangular openings is used for shredding.
After mounting the selected attachment, place a container under its outlet. The product is ready for use.
Starting the device
Make sure that none of the switches is pressed, press the button marked "STOP & RESET" and then plug the power cord into
the socket.
The product has a switch marked:
"ON", which starts the full speed of the product,
"HALF", which starts half the speed of the product.
The button marked "REVERSE" activates the reverse gear.
The button marked "STOP & RESET" is used to stop the device operation.
Starting the device will take place after pressing the switch marked ON or HALF. The switch does not need to be held in this position.
The device is switched off by pressing the STOP & RESET button. Wait until the motor stops.
The button marked "REVERSE" is intended for short engaging of the reverse gear. Press and hold the button in this position. The
auger starts to rotate in the opposite direction, which allows you to clean the inside of the food attachment. Releasing the button
will automatically stop the device.
Use reverse gear when the performance of the machine is reduced. Turning the auger in the opposite direction allows the food to
be withdrawn from the inside of the attachment. Next, start the device again by pressing the ON or HALF button and then grind
the food again. If you still notice a decrease in performance, stop the device operation, disconnect the attachment, disassemble
and manually clean it according to the instructions in the "Product Maintenance" section.
When you have fi nished using the product, turn it off by pressing the STOP & RESET button, then unplug the product's power cord
from the socket and begin maintenance activities on the product.
MAINTENANCE AND STORAGE
CAUTION! Never immerse the drive housing in water or other liquids. This may result in electrical shock and will damage the
product. All components of the attachments can be immersed in water or washed under the jet of water.
Parts of the device which have been in contact with food should be cleaned immediately after use. Dried food residues can clog
the components of the product, which can lead to a loss of performance or even damage the product. If this happens, immerse
these parts which were described as immersible in warm water with dishwashing liquid and leave it to soak, then clean with a
soft sponge or a brush and water with dishwashing liquid. None of the parts of the device is suitable for washing in mechanical
dishwashers. This can lead to the loss of shape, colour and texture of the materials they are made of.
Clean the openings in the juice-squeezing attachment and the grinder attachment strainers with a soft plastic brush. Do not use
sharp objects (including scouring sponges) to clean any part of the product.
Clean the drive housing with a soft cloth dampened with a water and mild detergent solution. Wipe dry. Do not use abrasive
cleaning agents.
Make sure all parts are cleaned and dried before connecting the device to the power supply. Store the product in dry, shaded
conditions. Protect the storage place from unauthorised access, especially by children. Store the product in the unit packaging
provided with the product.
O R I G I N A L
I N S T R U C T I O N S
15
Advertenties
Inhoudsopgave
