Inhoudsopgave
Advertenties
All manuals and user guides at all-guides.com
Installation
Disposal of the packaging
The packaging protects the device from transport damage. The pack-
aging materials have been selected according to environmental and
waste disposal aspects and can therefore be recycled.
Returning the packaging to the material cycle saves raw materi-
als and reduces the amount of waste generated. When no longer
required, dispose of the packaging materials in accordance with the
local regulations.
NOTE
►
If possible, keep the original packaging during the warranty pe-
riod in order to be able to pack the device properly in the event
of a warranty claim.
Installing the WLAN antennae
Proceed as follows to install the WLAN antennae:
Screw the screw connectors of the WLAN antennae onto the
‹
antenna terminals
NOTE
►
Do not tilt the WLAN antenna when fitting it to the screw
connection. The thread could be damaged.
►
The WLAN antenna is completely screwed-in after 4 com-
plete turns.
Push the WLAN antennae 90° to an upright position and align by
‹
turning them clockwise.
Preconditions for operation
The following preconditions must be satisfied for installation and
operation of the device:
■
The TCP/IP protocol must be installed on all PCs.
■
The web browser must support JavaScript (e.g. Mozilla Firefox or
Microsoft Internet Explorer).
■
An Internet account with an Internet service provider and a DSL
connection are necessary for Internet access.
■
All devices employed must comply with the standards IEEE
802.11g, IEEE 802.11b or the draft IEEE 802.11n.
WLAN Router 300
on the rear side of the device.
g
55
Advertenties
Hoofdstukken
Inhoudsopgave
