Advertenties
Instruction manual
Heating mode instructions
•
Press the heat mode button and the display shows the ambient
temperature.
•
Press temperature button to set the temperature, the display will
flash digitally, which can be set to 16 to 30 degrees.
•
Set temperature should be higher than the ambient temperature,
so that the heating function will be turned on.
•
When the ambient temperature reaches the target temperature,
the heating element will stop for a while and machine will be
fanning to vent heat, after a few seconds the fan will stop too until
the ambient temperature is below target temperature.
•
If the ambient temperature is lower than the set temperature the
heating function will activate automatically.
•
Note: The default setting temperature is 20 °C. In the heat mode,
when the ambient temperature is below 0 °C, the display only
shows 01, it does not display negative temperature value. When
the heat mode runs over 9 hours, the machine will automatically
stop. Restart by pressing the host power button or by using the
button on the remote control.
USING THE DEVICE WITH PRINCESS HOME APP
•
The device can be used manually with its built-in controls or you
can use a smart phone or smart speaker to control it. Before you
begin, ensure the Princess Home app is downloaded. The
Princess Home app is available on Android and iOS.
•
Download the correct version of the Princess Home app via our
website princesshome.eu/nl-nl/princess-home-app or use QR:
Pair your device to the Princess Home app
•
Make sure your device is powered.
•
Open the Princess Home app.
•
Select your country code, enter the cell phone number and tap
"Get" to get a message containing the verification code.
•
Enter the verification code in the message and tap "Log in" to log
in to the App.
•
Click "Add Device" to add a new device.
•
Select the device you wanted to connect.
•
Follow the instructions on the app to connect the device.
•
To control your device with voice using a smart speaker please
refer to the manufacturer's instructions on how to enable a skill
through your device.
Advertenties
