Advertenties
1. XLR Line input: Use the XLR connectors to connect to Line signal source to the XLR input of the amplifier.
2. RCA Line input: Use the RCA cables to connect the line signal source to the RCA line input of the amplifier.
3. SPEAKON OUTPUT: Connect the speakon outputs to the input of passive speakers.
4. MAIN Speakers output: Connect the main speaker outputs to the input of passive speakers.
Note: If there are four speakers connected to the speakon outputs and main speaker outputs,
the impedance of each speaker must be 8ohms at least to protect the amplifier.
5. LINK output: Connect the XLR input signal to another amplifier.
6. Power Cord: Use the power cord provided with the amplifier to connect to the power outlet.
SPECIFICATIONS:
Model
Max. power
S/N ratio
Frequency range
THD
Impedance
Protection
Power supply
Dimensions
Weight
Please Note: Specifications and improvements in the design of this unit and this manual are subject to change
without any prior written notice.
EN
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local author-
ities or your dealer about the way to proceed.
4
Manual - SA Amplifier Series
SA500
2 x 250W
> 76dB
20Hz-20kHz
<0.1%
4 ohms min.
3A fuse
230V~50Hz
48.5 x 30 x 10cm
5.08kg
© Lotronic 2020
SA1000
2 x 500W
> 76dB
20Hz-20kHz
<0.1%
4 ohms min.
5A fuse
230V~50Hz
48.5 x 28 x 9cm
5.57kg
SA2000
2 x 1000W
> 76dB
20Hz-20kHz
<0.1%
4 ohms min.
5A fuse
230V~50Hz
45 x 43 x 9
9.34kg
Advertenties
