Advertenties
Manual - SA Amplifier Series
CONTROLS
1
1. Power: Press this button to power ON/OFF the unit.
2. L Volume: Use this knob to adjust the volume of left channel of main speaker output
3. R Volume: Use this knob to adjust the volume of right channel of main speaker output.
REAR PANEL SA500 & SA1000
1. XLR Line input: Use the XLR connectors to connect to Line signal source to the XLR input of the amplifier.
2. RCA Line input: Use the RCA cables to connect the line signal source to the RCA line input of the amplifier.
3. 1/4" Line input: Use suitable jacks to connect the line signal source to the 1/4" line input of the amplifier.
4. SPEAKON OUTPUT: Connect the speakon outputs to the input of passive speakers.
5. MAIN Speakers output: Connect the main speaker outputs to the input of passive speakers.
Note: If there are four speakers connected to the speakon outputs and main speaker outputs,
the impedance of each speaker must be 8ohms at least to protect the amplifier.
6. Power Cord: Use the power cord provided with the amplifier to connect to the power outlet.
REAR PANEL SA2000
xxxx
1
3
2
3
1
5
www.ibiza-light.com
4
5
5
2
4
3
2
3
6
6
EN
3
3
Advertenties
