Download Inhoudsopgave Inhoud Print deze pagina

Protection Against Overheating - Dimplex FW 550 S Montage- En Gebruiksaanwijzing

Vorstbeveiliger
Inhoudsopgave

Advertenties

FW 550 S
4. Operation
The room temperature is regulated using the infinitely
adjustable thermostat (A).
If the rotary knob is set to the lowest setting i.e. to the
extreme left, the thermostat switches the heating de-
vice on at an ambient temperature of approx. 10° C.
When the thermostat switches on, the red lamp lights
up (B).
ATTENTION!
Rooms can become overheated if left unat-
tended whilst being heated; this depends on
the size of the room, its heating requirements
and the setting of the thermostat. Persons
who are not able to vacate the room if the
temperature becomes too high can thus be
placed in danger.
NOTE
NOTE
The necessary heat demand for frost protection must
be met by the heating capacity of the unit and must be
determined by the specialist.

4.1 Protection Against Overheating

If the permissible temperature is exceeded, the heating
device switches off automatically. If this occurs, pull the
mains plug out and leave the device unplugged for a
few minutes so that the temperature limiter can switch
back again. Then remove the cause, e.g. when the air
grid is blocked or covered. When the device has cooled
sufficiently, it can be started up again.
www.dimplex.de/en
All manuals and user guides at all-guides.com
1909/E
5. Faults
If the heating device does not give off heat, check the
following points:
Has the thermostat been set to the desired temper-
ature?
Has the overheat protection been triggered? See
chapter 4.1!
Is the fuse in the fuse box switched on?
If you cannot remedy the fault, please contact your re-
tailer. If required, you can also address your queries to
the service hotline of Glen Dimplex Deutschland
GmbH.
To process your order, please state the device type as
well as its production number (E No.) and production
date (FD). This information is listed on the type plate.
Repairs and corrective measures must only be carried
out by a qualified electrician or by your after-sales ser-
vice.
6. Cleaning
To clean the device, first disconnect it from the mains
and allow it to cool down. Clean the outside of the unit
using a soft, damp cloth. Do not use scouring powder
or furniture polish as this may damage the surface.
Dust which gathers inside the device can be removed
from the outside using a vacuum cleaner.
7. Technical Data
Heat output
Connection voltage
Degree of protection
Safety class
Dimensions (W x H x D)
Weight
8. Warranty
This product is supplied with a two-year warranty ac-
cording to our terms of guarantee.
9. Note on Disposal
Do not dispose of the unit with general house-
hold waste. The device must be taken to a local
waste disposal plant.
Glen Dimplex Deutschland GmbH
Am Goldenen Feld 18
D - 95326 Kulmbach
English
500 W
1/N/PE~, 230 V
IP20
I (with protective conductor)
260 x 242 x 121 mm
1.2 kg
Tel.: +49 9221 709 700
Fax.: +49 9221 709 701
E-mail: info@gdhv.one
EN-7

Advertenties

Inhoudsopgave
loading

Inhoudsopgave