USE
The control panel is equipped with touch-screen operation. You do not need to press any buttons - the
appliance will respond to touch. Make sure that the control panel is always clean. Each time it is touched,
the appliance will respond with a signal.
CONNECTING
When you place the plug in the outlet, you will hear a signal. On the display 4 dashes [----] are 昀氀ashing and
the indicator light of the power button is also 昀氀ashing. Meaning that the hob has gone into standby mode.
USE
When operating the device, please put on a pan/pot 昀椀rstly. Note: Always place the pot or pan in the
1.
centre of the hotplate.
Keep the on/o昀昀 button pressed to turn the the hob on. You hear a signal and 4 dashes [----] appear
2.
on the display. The indicator light of the on/o昀昀 button lights up.
Press the button for the desired cooking zone. The indicator light for the selected cooking zone
3.
lights up and 2 dashes [--] appear on the display.
Now select the desired power with the slider. You can choose from 7 di昀昀erent settings, of which P7 is
4.
the hottest and P1 the coldest. The selected setting is shown on the display.
Display
P1
Power
300 W
Press the on/o昀昀 button again to turn o昀昀 the appliance. The ventilation stays on for a while to cool
5.
down.
The power on the display is always that of the selected zone. The indicator light next to the button for the
cooking zone lights up for the selected zone. If you want to increase or decrease the power of a cooking
zone, you have to check which zone is selected. To change zones, press the cooking zone button.
! Attention: the appliance will sound several times if the correct pot is not on the hob and will then
automatically switch o昀昀 after one minute. The display shows the error message [E0].
www.domo-elektro.be
P2
P3
600 W
1000 W
2
1
P4
P5
1300 W
1500 W
3
P6
P7
1800 W
2000 W
4
DO333IP
27