Inhoudsopgave
Advertenties
24
Note: Avoid sucking in dust and dirt.
4. If the maximum fill level (marked "MAX") of the water tank has been
reached, the tank must be emptied.
Note: It is recommended to empty the tank before the maximum water
level has been reached. Otherwise, small amounts of water may get
into the ventilation system and damage the device.
5. To empty the water tank, firstly turn off the device by pressing Power
button.
6. Then pull the water tank plug and pour dirty water into a container or
sink.
7. Close the water tank opening with the plug afterwards.
8. When working with the device is finished, press Power button to turn it
off. LED indicator goes off.
Note: After each use remember to clean the device (see section
"Cleaning and maintenance" and fully charge it (see section "Before
first use").
CLEANING
EN
• Prior to cleaning make sure the device is turned off.
• Remove the suction nozzle from the separator by pressing lock button.
• Then remove the separator by pressing separator lock buttons.
• Rinse the suction nozzle and separator under running water.
• Clean the base unit with soft, slightly damp cloth. Do not use any
abrasives or chemical agents to clean it.
CAUTION! Base unit contains electrical components. It is strictly
forbidden to clean the base unit under running water or immerse it in
water or any other liquid!
• Remove wiper head from the sprayer and rinse it under running water.
• Wash the cloth. It can be washed in a washing machine.
• After the water tanks are emptied, rinse them under running water.
• None of the parts of the device is suitable for cleaning in washing
machine.
• After cleaning, leave the device to completely dry in an open space.
Important! Before each assembly make sure that all of the parts and
accessories are completely dry!
CLEANING AND MAINTENANCE
Owner's manual
Advertenties
Inhoudsopgave
