Advertenties
Ice cubes stick
together.
Ice making cycle
is normal but no
ice formed.
ATTENTION
► If above mentioned steps don't solve the problem, please contact your customer
service.
18 Disposal of the Old Device
Old electric and electronic devices frequently still contain valuable materials.
However, they also contain damaging substances, which were necessary for
their functionality and safety.
If these were put in the non-recyclable waste or were handled incorrectly, they could be
detrimental to human health and the environment. Therefore, do not put your old device
into the non-recyclable waste under any circumstances.
Utilise the collection point, established in your town, to return and recycle old electric
►
and electronic devices. If necessary, contact your town hall, local refuse collection
service or your dealer for information.
Ensure that your old device is stored safely away from children until it is taken away.
►
► Blowing gas inside the unit is flammable. The disposal of this flammable material should
be in accordance with national regulations.
19 Guarantee
We provide a 24 month guarantee for this product, commencing from the date of sale, for
faults which are attributable to production or material faults.
Your legal guarantee entitlements in accordance with § 439 ff. BGB-E remain unaffected
by this.
The ice making cycle is
too long.
Water temperature in
inner tank is too low.
Room temperature or
water temperature in
inner tank is too high.
Not enough cooling
agent in the coolant
reservoir or a part of the
electronics is defect.
Please note
Stop the ice maker and start it again when
the ice blocks are melt.
Replace the water. Temperature of water
recommended at 8-32°C.
The room temperature should be 5-40°,
water temperature should be 8-32°C.
Contact your customer service.
33
Advertenties
