Advertenties
15.1 Key function
15.2 Operation
► Please wait min 24 hours before you switch on the ice maker. You will find that the
cooling agent settles out in this time.
Open the cover of the ice maker and remove the ice basket.
Check that silicon plug is correctly placed in water outlet.
Fill water into the water reservoir and observe the min and max marking. Close the lid of
the device.
Press the "on/off" button to begin the ice making cycle.
Depending on water and room temperature, the ice making cycle lasts approx. 6 to 13
minutes.
If water pump can't inject water, the ice maker will stop automatically and signal tone
sounds. The "Add Water" indicator will be on. Press the "on/off" button and fill in water.
The ice maker stops working when the ice basket is full. In this case the "ICE FULL"
indicator will light up and signal tone sounds.
Drain all the water, if unit isn't used. Always store the unit without water in the water
reservoir.
Attention
► Change water in the water reservoir every 24 hours to avoid pathogenic organisms.
16 Cleaning and Maintenance
This chapter provides you with important notices with regard to cleaning and
maintaining the device. Please observe the notices to prevent damages due to cleaning
the device incorrectly and to ensure trouble-free operation.
Please note
ON/OFF = on/off button
ICE FULL = control lamp (ice basket is full)
ICE= flashes, when device is on,
lights when device is working
ADD WATER = Add water into watertank
31
Advertenties
