The control panel displays [ L ]:
• Refer to the chapter control panel locking page.
One or all cooking zone cut-off:
• The safety system functioned.
• You forgot to cut-off the cooking zone for a long time.
• The pan is empty and its bottom overheated.
• The hob also has an automatic reduction of power level and breaking Automatic
overheating
Continuous ventilation after cutting off the hob:
• This is not a failure, the fan continuous to protect the electronic device.
• The fan cooling stops automatically.
The automatic cooking system doesn't start-up:
• The cooking zone is still hot [ H ].
• The highest power level is set [ 9 ].
The control panel displays [ E2 ] or [ E H ]:
• The hob is overheated, let it cool and then turn it on again.
The control panel displays [ E3 ]:
• The pan is not adapted, change the pan.
The control panel displays [ E6 ]:
• Defective network. Control the frequency and voltage of the electrical network.
The control panel displays [ E8 ]:
• The air inlet of the ventilator is obstructed, release it.
If one of the symbols above persists, call the After-Sales Service.
ENVIRONMENT PRESERVATION
• The materials of packing are ecological and recyclable.
• The electronic appliances are composed of recyclable, and sometimes harmful materials
for the environment, but necessary to the good running and the safety of the appliance.
• Don't throw your appliance with the household refuses
• Get in touch with the waste collection centre of your
commune that is adapted to the recycling of
the household appliances.
30