Inhoudsopgave
Advertenties
leak caused by damage to the cooler elements, move your appliance from open flame or heat
sources and ventilate the room where the appliance is located for a few minutes.
BEFORE FIRST USE
• Remove all packaging.
• Clean the inside of the appliance with warm water and a little liquid detergent to remove
manufacturing and transportation dust.
OPERATION
Ensure that the appliance is placed on a flat and stable surface.
Plug the appliance into the mains socket. The display will show the current actual temperature of
the internal cabinet.
Allow the appliance to cool down for 2-3 hours before placing wine bottles in the appliance.
Selecting the temperature
The temperature can be set from 5°C to 22°C. The default factory temperature is set at 12°C.
1. Repeatedly press
• Each time you press
2. The temperature selected will flash on the display for approximately 3 seconds, then the
display will return to the current actual temperature of the internal cabinet.
• The current actual temperature will vary depending on the quantity of bottles stored and
how often the door is opened.
• To view the set temperature, press
display for approximately 3 seconds and then return to the current actual temperature of
internal cabinet.
• The temperature display can be switched between Celsius (°C) and Fahrenheit (°F) by
pressing and holding
Turning on/off the appliance
Press and hold
Interior lights
Press
to turn the interior lights on or off.
/
to select the required temperature.
/
the temperature will be increased or decreased by 1°C.
The corresponding indicator light °C or °F
.
for approximately 3 seconds to turn on or off the wine cooler.
/
, the set temperature will flash on the
will illuminate.
Advertenties
Inhoudsopgave
