Download Inhoudsopgave Inhoud Print deze pagina

Instructions For Lighting The City 420 G - OUTDOORCHEF CITY 420 G Handleiding

Inhoudsopgave

Advertenties

5. If the gas does not light within 3 seconds, set the gas regulating knob to
repeat point 4.
6. If it is not possible to light the barbecue after 3 attempts, check the causes (as described in the TROUBLESHOOTING section).

INSTRUCTIONS FOR LIGHTING THE CITY 420 G

5. If the gas does not light within 3 seconds, set the gas regulating knob to
repeat point 4.
6. If it is not possible to light the barbecue after 3 attempts, look for the causes (as described in the TROUBLESHOOTING section).
INSTRUCTIONS FOR LIGHTING THE ADDITIONAL GRILLING AREA IN THE VENEZIA 570 G
1. Make sure that all connections between the gas hose, the gas pressure regulator and the gas bottle are firmly tightened (Follow the
instruction in the CHECKING FOR LEAKS chapter).
2. Remove the granite cover from the additional grilling area and place it under the side shelf in the holder provided. CAUTION: Never light the
barbecue when the granite cover is closed.
3. Open the gas supply at the gas bottle.
4. Press the right or left gas regulating knob and turn it anticlockwise to the
catches and the gas is burning.
5. If the gas does not light within 3 seconds, set the gas regulating knob to
Then repeat point 4.
6. If it is not possible to light the burners of the additional grilling area after 3 attempts, look for the causes (as described in the
TROUBLESHOOTING section).
7.
Follow point 4. in order to start the second burner.
8. Do not cover the additional grilling area until after the granite work surface has cooled down fully.
OUTDOORCHEF.COM
. Wait 2 minutes to allow the uncombusted gas to dissipate. Then
1. Make sure that all connections between the gas hose, the gas
pressure regulator and the gas bottle are irmly tightened
(Follow the instruction in the CHECKING FOR LEAKS chapter).
2. Open the barbecue lid. CAUTION: Never light the barbecue
when the lid is closed.
3. Open the gas supply at the gas bottle.
4. Press the gas regulating knob and turn it anticlockwise to the
setting. Press the red ignition button several times until
the gas lights.
. Wait 2 minutes to allow the uncombusted gas to dissipate. Then
setting. Press the ignition button and hold it until the spark
. Wait 2 minutes to allow the uncombusted gas to dissipate.
20

Advertenties

Inhoudsopgave
loading

Inhoudsopgave